Equipment
- Punch Presses – 35, 60, 80, 110 Metric Tons
- 28 Ton Hydraulic Press
- Comprehensive Tool Room
- Press Capacity to 125 Tons
- Blanking up to .25 thick
- Piercing up to .25 thick
- Single, Compound, and Progressive Dies
Metal Stamping
Part Specs
- Draw depth 4″
- Draw diameters to 15″
- Perforate and blank, thicknesses from 0.005 through 3/8
- Forming within a 2 ft x 3 ft envelope
Metal Fabricating
Equipment
- 20 Ton CNC Turret Press 10 Gauge
- CNC Trimming-Beading Machine
- 38 Ton 6 ft Press Brake
- 1/8 thick x 6 ft Hydraulic Shear
- Slip Rolls, up to 16 gauge x 4 ft length
- Custom Blanking, Panel Fabrication
- Comprehensive Tool Room
Part Specs
- Panels 40 x 48 x 10 gauge (0.134 thick)
- Bending and Seaming up to 6 ft length
- Rolling Mild Steel 4 ft Wide up to 16 Gauge (0.060 thick)
CNC Turning and Milling
Equipment
- Lathes CNC 2 Axis – 2.830 in Bar/10 in Chuck.
- Lathes CNC 2 Axis – 1.625 in Bar/6 in Chuck.
- Lathes CNC 4 Axis – 1 in Bar
- Milling CNC VMC 4 Axis 40 x 25 x 25 in
- Milling CNC 2 Axis 24 x 48 in
- Gap Lathes – 27 in Diameter x 4 in Thick/10 in Diameter x 55 in Centers
- Full Compliment of Support Equipment
Part Specs
- Collet Type Work Holding from 5-C to S-26 (Diameters from 0.06 through 2.750)
- Turn Tool Steels up to 65 Rc
- Manual Turning Capacities up to 27 in Diameter x 4 in
- 10 x 55 in Center Work
- Up to 2.830 in Diameter/Bar Feeding CNC
- 10 in Chucker Work and 20 in Centers CNC
- 4 Axis CNC Milling Envelope is 40 x 25 x 25 in